https://geek.jasonhancock.com/tags/raspberry-pi/ Recent content in Raspberry Pi on Jason Hancock Hugo -- gohugo.io en-us © 2017 Jason Hancock. All Rights Reserved Wed, 05 Oct 2022 00:00:00 +0000 https://geek.jasonhancock.com/2022/10/05/rpi-k8s-cluster-part3/ Wed, 05 Oct 2022 00:00:00 +0000 https://geek.jasonhancock.com/2022/10/05/rpi-k8s-cluster-part3/ This is part 3 of a series. Part 1 Part 2 We left off part 2 of the series with the hardware assembled, installed into the case, case mounted into the rack, and the base OS image booted up. I decided to install k3s as it seemed ideally suited to the nature of this cluster. The instructions in the Quick Start Guide worked well, however I ran into an issue that required me to modify the /boot/cmdline. https://geek.jasonhancock.com/2022/09/18/rpi-k8s-cluster-part2/ Sun, 18 Sep 2022 00:00:00 +0000 https://geek.jasonhancock.com/2022/09/18/rpi-k8s-cluster-part2/ This is part 2 of a series. Part 1 Part 3 I have a shallow network rack in my office closet where my router, switch, and other miscellaneous equipment is mounted. I decided to design and 3D print a 1u case to house the equipment. I found a plate with the openings for all the ports on Thingiverse. I started with that and based on the mechanical drawings designed and printed an enclosure in three pieces. https://geek.jasonhancock.com/2022/08/30/rpi-k8s-cluster-part1/ Tue, 30 Aug 2022 00:00:00 +0000 https://geek.jasonhancock.com/2022/08/30/rpi-k8s-cluster-part1/ This is part 1 of a series. Part 2 Part 3 I’ve decided to build a small home Kubernetes cluster for various reasons. I do a lot of k8s stuff at work and it would be nice to have a dev cluster other than the Docker Desktop built-in k8s cluster (it’s usually broken more often than it’s working). I have a few containerized workloads I run on my Synology NAS, but it’s not very powerful.